Painted Kit: 1/100 Gerbera Tetra Resin Kit Gallery

Here's a gallery of the completed 1/100 Gerbera Tetra Resin Kit by SMS.

Painting: 1/7 Kanu Unchou

With all the prepainting preparations finished on the kit, I can now start with the painting process of my 1/7 Kan'u Unchou resin kit.

Resin Kit: 1/7 Kan'u Unchou - Unboxing And Dryfit Build

After finishing the painting of my 1/8 Nami P.O.P. Sailing Again Resin Kit, I now start work on my 1/7 Kan'u Unchou resin figure. The kits, like Nami, was bought from E2046.

The box is small and compact but the contents are well protected inside. It comes with a single picture of the finished kit and a parts list. It doesn't show how to put the kit together, so I have to figure that out.

Painting: 1/100 AGX-04 Gerbera Tetra - Assembly

To wrap up my painting of the SMS 1/100 Gerbera Tetra Full Resin Kit, I apply the decals and the final top coat on the pieces then do the final assembly. I used Future Floor Shine for my top coat.

To assemble the parts of the Gerbera Tetra, I used super glue for adhesive.

Head

Painting: 1/8 Nami P.O.P. Sailing Again Resin Kit

After painting a few plastic Gundam kits and one resin Gundam kit, I decided to try my hands on painting anime resin figures. My first kit: a 1/8 Nami from One Piece. The kit is a resin version of Megahouse's Excellent Model/Portrait Of Pirates "Sailing Again" Nami.

The kit consists of 19 pieces, a decal of Nami's tattoo. The picture below has Nami's eyes painted cause I tested out painting eyes before actually working on the kit.

Painting: 1/100 AGX-04 Gerbera Tetra - Color Coat, Pre-shade and Detailing

Continuing with the painting of the SMS 1/100 Gerbera Tetra Full Resin Kit, after applying the base coat, some masking and a bit of pre-shading is needed. I used black as a pre-shade.